Product News

Vibration damper and spiral vibration damper are both anti-vibration fittings, but these two anti-vibration fittings have some differences in appearance, material, and anti-vibration principle.In terms of appearance and material, vibration damper is composed of two hammers connected at both ends of a steel strand, and a wire clamp is fixed in the middle. The main materials are usually aluminum alloy, steel strand, gray cast iron and other metal materials.The spiral vibration damper is a spiral PVC round rod, the main materials are PVC and PE heating and extrusion molding.And the anti-vibration principles of these two products are different. Vibration damper mainly uses the inertia of the hammer head to cause internal friction of the steel strand to consume the vibration energy of the overhead wire, while spiral vibration damper dissipates the vibration energy through the impact with the cable, so as to eliminate or reduce the vibration generated by the laminar flow wind when the cable is running, and protect the cable and fittings.

Cable storage bracket is a bracket or rack built into electrical equipment rooms such as buildings or underground passages to facilitate the storage and management of redundant cable lines. It is an important accessory used in transmission lines and has the effect of supporting fixed wires and optimizing tension distribution. The cable storage bracket can keep the cable lines neat and orderly, reduce the sagging and vibration of the wires, and allow the safe and stable operation of the computer room cable lines. It is suitable for various high-voltage transmission lines and complex terrain environments.

In power transmission, the stable suspension of wires is very important. This is not only related to the stable supply of electricity, but also to the safe operation of the entire power grid. However, traditional wire suspension methods often face many problems, such as complex installation, insufficient grip, and large damage to the wires. These problems seriously affect the transmission efficiency and the service life of the line. However, after reading this article, you will know an important tool for solving problems.

Pole clamp is a tool or device used for fixing. Pole clamp is commonly used to fix objects, make objects firm and prevent them from moving or falling off. Pole clamp consists of a hoop and fasteners. When used, the hoop can be tightly held to the object that needs to be fixed by adjusting the fasteners. Pole clamp usually consists of two parts, the inner ring and the outer ring. The inner ring is tightly coated on the periphery of the two components to be connected, while the outer ring is connected to the inner ring by bolts or other fasteners. When the outer ring is fastened, the inner ring exerts pressure on the two components to produce friction and prevent relative movement.

Corona ring coil is an annular or arc-shaped part made of metal. It is a common auxiliary device installed at the end of high-voltage equipment or in parts with large curvature. In order to adjust the distribution of the surrounding electric field, the shape of corona ring coil is a smooth curved surface without edges, corners and tips.

In the operation of power lines, earthquake disasters can easily cause line wires to be displaced, wire clamps to loose or even break, which in turn causes power supply interruptions. The preformed wire tension clamp can improve the seismic resistance of the line from multiple angles and provide a guarantee for the safe and stable operation of the power line.