The suspension clamp is mainly used for overhead power lines or substations. The conductor and lightning conductor are suspended on the insulator or the lightning conductor is suspended on the tower through the connection hardware. It can also be used to support the transposition conductor on the transposition tower and fix the non-linear tower jumper. The suspension clamp is used to suspend or support the conductor, and is mainly a hardware that bears vertical loads.
The Installation of the Optical Cable Suspension Clamp Needs to be Strictly in Accordance with the Specifications：
1. First, mark the central position of the optical cable suspension point, divide the Preformed wire into a group of 2-3, and make sure that the central mark of each sub-bundle is aligned with the optical cable mark, and then wrap it 3-4 times by hand. After all the sub-bundles are wound, the rubber clamp is divided into upper and lower halves and embedded in the outside of the Preformed wire and temporarily fixed with tape.
2. Then place the outer Preformed wire parallel to the rubber fixture, align its center color mark with the center of the fixture, and wrap it 2-3 times on both sides of the fixture to ensure that the outer Preformed wire is completely consistent with the curved surface of the rubber fixture and the gap is uniform. After winding, the two ends need to be smoothed by hand without using any tools.
3. Finally, install the aluminum splint and make sure the hanging ears are facing up, fix the entire device to the support with a U-shaped hanging ring, tighten all nuts and install the closed pin. The entire installation process must ensure that the center marks of each component are accurately aligned, the outer Preformed wire must be naturally flat and not cross-crossed, the rubber fixture and the outer Preformed wire must be completely fitted, and all operations must be completed by hand to avoid damaging the optical cable.
OPGW optical cable is a transmission cable with optical fiber communication lines, usually used by power companies. OPGW optical cable consists of a tubular structure containing one or more optical cables, and the outer shell is composed of steel and aluminum. When purchasing Suspension Clamp For OPGW Cable, various usage conditions such as bare wire or wrapped wire should be considered. Its type and structure should match the type and specification of the suspended wire and ground wire.
The Suspension Clamp For OPGW Cable produced by our company adopts high-strength anti-corrosion materials and flexible clamping structure, which can effectively disperse the force of the optical cable. Suspension Clamp For OPGW Cable reduces mechanical damage to the cable and provides excellent vibration resistance, so that the optical cable can be used for a long time. In terms of after-sales service, we provide comprehensive technical consultation and after-sales service, including guidance on installation of Suspension Clamp For OPGW Cable, maintenance suggestions and long-term technical support.
