News

Vibration damper and spiral vibration damper are both anti-vibration fittings, but these two anti-vibration fittings have some differences in appearance, material, and anti-vibration principle.In terms of appearance and material, vibration damper is composed of two hammers connected at both ends of a steel strand, and a wire clamp is fixed in the middle. The main materials are usually aluminum alloy, steel strand, gray cast iron and other metal materials.The spiral vibration damper is a spiral PVC round rod, the main materials are PVC and PE heating and extrusion molding.And the anti-vibration principles of these two products are different. Vibration damper mainly uses the inertia of the hammer head to cause internal friction of the steel strand to consume the vibration energy of the overhead wire, while spiral vibration damper dissipates the vibration energy through the impact with the cable, so as to eliminate or reduce the vibration generated by the laminar flow wind when the cable is running, and protect the cable and fittings.

In the operation of industrial equipment, spiral vibration damper is an important vibration damping component, and its performance will affect the stability and service life of the equipment. Therefore, in order to make the shock absorber run more stably and for a longer time, we should adopt scientific maintenance and care methods. Our company's suggestions to you are as follows:

Protective fittings are a type of fittings used for line protection in power fittings. They are key components used for protection in power lines, such as preformed vibration damper,Preformed tie wire and cable fitting pole clamp, which ensure the electrical and mechanical safety of lines in different scenarios. Do you know their specific applications?

As we all know, the high-voltage electric poles are very high from the ground, and the distance between the poles is very far. When the wind is strong, it will cause the line to shake vigorously. Over time, it will cause the wire to be damaged and the line to break, which will affect the safe power supply. Therefore, in order to reduce the occurrence of such incidents, a small hammer will be hung on the line, hanging at the position where the pressure wire is close to the porcelain bottle. This small hammer has a scientific name, called "vibration damper". From the name, we can know vibration damper function. Shock-absorbing hammer protective rod ismainly set to prevent the wire from vibrating in windy weather.

During the installation and maintenance of power and communication lines, the lines are often affected by wind and external environment. How to effectively suppress the swing of wires or optical cables and extend the service life of the lines? Can anticorona ring be the key to solving this problem? I believe that after you understand it, you will get the answer you want!